The Content of Polyphenolic Compounds in Cocoa Beans (Theobroma cacao L.), Depending on Variety,Growing Region,and Processing Operations: A Review

Polyphenols form the largest group of compounds among natural antioxidants, which largely affect the overall antioxidant and antifree radical activity of cocoa beans. The qualitative and quantitative composition of individual fractions of polyphenolic compounds, even within one species, is very diverse and depends on many factors, mainly on the area of cocoa trees cultivation, bean maturity, climatic conditions during growth, and the harvest season and storage time after harvest. Thermal processing of cocoa beans and cocoa derivative products at relatively high temperatures may in addition to favorable physicochemical, microbiological, and organoleptic changes result in a decrease of polyphenols concentration. Technological processing of cocoa beans negatively affects the content of polyphenolic compounds.     

Space charge region effects in bidirectional illuminated P3HT:PCBM bulk heterojunction photodetectors

Organic semiconductors are widely investigated for their application in photovoltaics and photodetectors. We show that the efficiency of these devices is strongly influenced by the position of the space charge region, due to unintentional doping, and wavelength-dependent absorption properties in bulk heterojunctions. Spray-coated P3HT:PCBM bulk heterojunction photodiodes with thicknesses up to 4.2 μm and semitransparent top contact enable the characterization of exciton generation and separation in both irradiation directions. A large difference in external quantum efficiency (EQE) is observed for top and bottom illuminated configurations and is explained by a bias dependent arrangement of the space charge region at the two contact electrodes. Numerical drift–diffusion simulations allow to get insight into first order mechanisms behind the spectral features of EQE data in highly-doped organic photodiodes.     

The effect of maturity and tissue on the ability of mid infrared spectroscopy to predict the geographical origin of banana (Musa Cavendish)

The objective of this study was to evaluate the effect of sample presentation (tissue type) and maturity (ripe and unripe) on the classification of banana (Musa Cavendish) samples sourced from two different geographical regions and analysed using mid infrared (MIR) spectroscopy. The coefficient of determination (R²) and the standard error of cross-validation (SECV) obtained using partial least squares discriminant analysis were 0.83 (0.33), 0.75 (0.25) and 0.94 (0.19) for the prediction of maturity, geographical origin and tissue type, respectively. No effect of either of type of tissue (e.g. pulp or peel) or maturity was observed. The results of this study demonstrated that MIR spectroscopy might be used to classify the origin of the banana samples at different degrees of ripeness. However, one of the limitations of this study is on the number of samples analysed and further validation must be recommended using samples from other sources, regions and harvest seasons.     

改进HSR-FCN的服装图像识别分类算法研究

目前网络上的服装图像数量增长迅猛，对于大量服装图像实现智能分类的需求日益增加。将基于区域的全卷积网络（Region-Based Fully Convolutional Networks，R-FCN）引入到服装图像识别中，针对服装图像分类中网络训练时间长、形变服装图像识别率低的问题，提出一种新颖的改进框架HSR-FCN。新框架将R-FCN中的区域建议网络和HyperNet网络相融合，改变图片特征学习方式，使得HSR-FCN可以在更短的训练时间内达到更高的准确率。在模型中引入了空间转换网络，对输入服装图像和特征图进行了空间变换及对齐，加强了对多角度服装和形变服装的特征学习。实验结果表明，改进后的HSR-FCN模型有效地加强了对形变服装图像的学习，且在训练时间更短的情况下，比原来的网络模型R-FCN平均准确率提高了大约3个百分点，达到96.69%。     

多先验融合的图像显著性目标检测算法

为了更加准确地检测出图像中的显著性目标，提出了多先验融合的显著性目标检测算法。针对传统中心先验对偏离图像中心的显著性目标会出现检测失效的情况，提出在多颜色空间下求显著性目标的最小凸包交集来确定目标的大致位置，以凸包区域中心计算中心先验。同时通过融合策略将凸包区域中心先验、颜色对比先验和背景先验融合并集成到特征矩阵中。最后通过低秩矩阵恢复模型生成结果显著图。在公开数据集MSRA1000和ESSCD上的仿真实验结果表明，MPLRR能够得到清晰高亮的显著性目标视觉效果图，同时F，AUC，MAE等评价指标也比现有的许多方法有明显提升。     

On optical flow techniques applied to breaking surges

Surface wave breaking is a challenging two-phase flow process which plays an important role in numerous physical processes. A highly-turbulent unsteady breaking surge was investigated experimentally in a large facility, and substantial aeration occurred in the roller. The application of three optical flow techniques (Lucas-Kanade, Horn-Schunck and Farnback) to the air-water region was tested. The results indicated that the Farnback technique provided most accurate results, although some misleading results could be obtained near the air-water boundaries of the roller. The bore generation by a rapid gate closure showed a highly-unsteady complicated velocity field, with substantial free-surface deformations, wave breaking and formation of large coherent structures before the surge detached from the gate. Further upstream, the surge propagated as a hydraulic jump in translation and the data showed a marked shear region with a recirculation zone above, showing air-water flow features comparable to stationary hydraulic jumps. The upper and lower bounds of air-water flow region yielded data implying an air-to-water velocity ratio about 4–5 for a Froude number Fr₁ = 2.1.     

Diffuse reflectance behavior of the printed cotton/nylon blend fabrics treated with zirconium and cerium dioxide and citric acid in near- and short-wave IR radiation spectral ranges

Near- and short-wave IR emission spectra of printed cotton/nylon blend fabrics coated with inorganic compounds in order to tune their diffuse reflectance behavior to the ones with woodland and desert backgrounds are investigated. In this regard, cotton/nylon blend fabrics printed with a four-color digital pattern were used as the substrate, and different concentrations of zirconium and cerium dioxide (ZrO₂ and CeO₂) with and without citric acid as a cross-linker were loaded on these fabrics using the pad-dry-cure method. The diffuse reflectance of the coated fabrics with various concentrations of nanoparticles and a cross-linker was first measured by near-infrared (NIR) diffuse reflectance spectroscopy (DRS). Then, fabrics with an optimum concentration of nanoparticles and appropriate reflectivity profiles similar to woodland and desert were investigated by field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), washing, and rubbing fastness properties. In general, NIR and short-wave infrared (SWIR) reflectance of fabrics coated with ZrO₂ and CeO₂ nanoparticles in range of 1% to 1.5% (w/v [%]) was suitable for matching with different environments. According to the findings obtained from the durability test, it was concluded that the washing fastness of the treated fabrics with CeO₂ nanoparticles was excellent in both environments. FE-SEM images of the treated fabrics containing ZrO₂ and CeO₂ indicated that the presence of nanoparticles on the surface of fabrics in woodland patterns was greater than the desert ones. However, the coated fabrics with CeO₂ and citric acid in the woodland pattern have shown better dispersion with a mean particle size of 30 to 60 nm.     

两相区配分时间对IQ&P钢组织与性能的影响

以含Cu低碳钢为研究对象,利用SEM、EPMA和拉伸试验研究了两相区配分时间对其组织演变、元素配分以及经IQ&P处理后力学性能的影响,并利用Dictra软件对元素配分行为进行了动力学计算。结果表明,IQ处理后试验钢中的块状马氏体形成于原铁素体区域;随两相区配分时间延长,粒状马氏体数量减少,板条状马氏体之间的间距减小。检测和计算结果的对比显示,C、Mn、Cu 3种元素的相对配分速率与计算结果一致,但实际配分速率低于各自的计算结果。随两相区配分时间延长,经IQ&P处理后试验钢的抗拉强度先增加后减小,而伸长率持续减小;在600 s时达到较好的强塑性匹配,强塑积为16 963.24 MPa·%。     

Void region restriction for additive manufacturing via a diffusion physics approach

A longstanding challenge in additive manufacturing (AM), the presence of void regions in additively manufactured components, causes two main issues: the enclosing of build material powder in powder bed fusion techniques and limiting tool access in critical post-processing operations to remove sacrificial support structures. As topology optimization has embraced and overcome many of the obstacles of incorporating AM constraints into the underlying numerical optimization statement, there exist few solutions that directly address this fundamental void region issue. By developing computationally efficient and effective solutions to this problem, the integration of these two advanced technologies can be fully realized. Drawing on inspiration from the principles of diffusion physics, a particle diffusion void restriction (PDVR) method is presented in this work that is capable of encouraging the optimization scheme to generate final designs that are fully accessible. Additionally, this method empowers the user to choose the type of post-processing method to clear support material (eg, three-axis or five-axis milling operations, number and orientation of part set-ups) and, therefore, quantify the level of costs associated with the post-processing operation. The PDVR optimization framework is demonstrated on multiple two- and three-dimensional test problems, with physically manufactured examples depicting the real-world benefits this method admits.     

面部运动单元检测研究综述

面部运动单元检测旨在让计算机从给定的人脸图像或视频中自动检测需要关注的运动单元目标。经过二十多年的研究，尤其是近年来越来越多的面部运动单元数据库的建立和深度学习的兴起，面部运动单元检测技术发展迅速。首先，阐述了面部运动单元的基本概念，介绍了已有的常用面部运动单元检测数据库，概括了包括预处理、特征提取、分类器学习等步骤在内的传统检测方法；然后针对区域学习、面部运动单元关联学习、弱监督学习等几个关键研究方向进行了系统性的回顾梳理与分析；最后讨论了目前面部运动单元检测研究存在的不足以及未来潜在的发展方向。